Windward Software Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Problem Description =====
Advanced Inventory Control - Moving stock by selecting the part number. Relocation of stock within the warehouse.

===== Solution =====
Stock Move is accessed from Stock Adjustments located within Inventory and Purchases.
This process will allow the selection of a part # and all the various locations this part is contained in will present on a grid. A new location can be identified and the move completed.

  - Go to **Inventory and Purchases | Stock Adjustments | Stock Move**
  - Select stock by "part"
  - Click Add
  - Find the part you are wanting to move
  - Once displayed on the grid use the elipse button located in the right column to choose the new location
  - If multiple locations are displayed, click on the elipse button contained in the column Header of the Qty to move column.
  - Identify the new location to move to and specify the qty 
  - Click the Move button

Note: this article is also publicly available at http://wiki.wws5.com/share/Moving_stock_by_part0805291229.html

{{training:moving_stock_by_part0805291229.flv|}}



Created by Charlene Scott at 29/05/2008 12:29:39 PM