Differences

This shows you the differences between two versions of the page.

--- pos_devices_-_toshiba_tech_canada_hardware [2010/11/25 18:06 (14 years ago)] – nbains
+++ pos_devices_-_toshiba_tech_canada_hardware [2010/11/25 18:18 (14 years ago)] (current) – nbains
@@ Line 71: / Line 71: @@
 **4.** Once you have verified the com port of the pole display, navigate to **C:\OPOS\Tec\** folder, and run the **OPOSchk.exe** tool to open up the pole display test software. Run the **ACK** test to display a series of tests on the pole display.
-**5.** After the tests complete successfully, you will need to install the **OPOS Common Controls drivers, and setup the pole display in the **POS Device Manager**.
+**5.** After the tests complete successfully, you will need to install the **OPOS Common Controls drivers**, and setup the pole display in the **POS Device Manager**.
-**6.** Navigate to the following link to install the **OPOS Common Controls drivers** for the pole display: ftp://ftp.windward-ca.com/pub/special/OPOS_Common_Control_Objects.EXE
+**6.** Navigate to the following link to install the **OPOS Common Controls drivers** for the pole display: ftp://ftp.windward-ca.com/pub/special/OPOS_Common_Control_Objects.EXE \\ \\
+**7.** After installing the OPOS Common Controls drivers, you will need to **restart your computer**.
+**8.** Once you have restarted your computer, open up **POS Device Manager** and select the **OPOS** tab. Under the **Pole Display** sub tab, verify you have selected the **pole display** device, under **use this device**.
+**9.** As well under the **Pole Display** tab, select **OPOS Pole Display** in the drop down, as well as your pre-determined **com port**.
+**10.** You have now successfully configured your **Toshiba OPOS Pole Display!**