User Tools

Site Tools


faq:pos-x_evo_2d_barcode_scanner_hid_mode

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
faq:pos-x_evo_2d_barcode_scanner_hid_mode [2018/07/23 11:01]
swind
faq:pos-x_evo_2d_barcode_scanner_hid_mode [2018/07/23 11:09] (current)
swind
Line 7: Line 7:
 To scan Drivers Licenses in Windward System Five on Cloud, the POS-X EVO 2D barcode scanner MUST be programmed as USB-HID. Also the RDP Virtual Chanel and the Remote POS Device Manager must be setup on the local workstation. To scan Drivers Licenses in Windward System Five on Cloud, the POS-X EVO 2D barcode scanner MUST be programmed as USB-HID. Also the RDP Virtual Chanel and the Remote POS Device Manager must be setup on the local workstation.
  
-First setup the RDP Virtual Chanel Software and the Remote POS Device Manager. +First setup the RDP Virtual Chanel Software and the Remote POS Device Manager.\\ 
-Setup instructions can be found here: +Setup instructions can be found here: [[http://​wiki.wws5.com/​doku.php?​id=employee:​rdp_virtual_channel_setup]] 
  
 You do not need pre or post ambles with HID mode. In the POS device manager, simply select the HID tab and select the HID scanner from the list. The EVO-2D shows as 4600.\\ You do not need pre or post ambles with HID mode. In the POS device manager, simply select the HID tab and select the HID scanner from the list. The EVO-2D shows as 4600.\\
faq/pos-x_evo_2d_barcode_scanner_hid_mode.txt · Last modified: 2018/07/23 11:09 by swind