User Tools

Site Tools


faq:disabling_ipv6_in_vista

Disabling IPv6 in Windows Vista and Windows Server 2008

Unlike Windows XP and Windows Server 2003, IPv6 in Windows Vista and Windows Server 2008 cannot be uninstalled. However, you can disable IPv6 in Windows Vista and Windows Server 2008 by doing one of the following:

• In the Network Connections folder, obtain properties on all of your connections and adapters and clear the check box next to the Internet Protocol version 6 (TCP/IPv6) component in the list under This connection uses the following items.

This method disables IPv6 on your LAN interfaces and connections, but does not disable IPv6 on tunnel interfaces or the IPv6 loopback interface.

• Add the following registry value (DWORD type) set to 000000ff

(Type ffffffff)

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters] “DisabledComponents”=dword:000000ff

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents

http://www.home-network-help.com/disable-ipv6.html

This method disables IPv6 on all your LAN interfaces, connections, and tunnel interfaces but does not disable the IPv6 loopback interface. You must restart the computer for this registry value to take effect.

For additional information about the DisabledComponents registry value, see Configuring IPv6 with Windows Vista.

If you disable IPv6, you will not be able to use Windows Meeting Space or any application that relies on the Windows Peer-to-Peer Networking platform or the Teredo transition technology.

faq/disabling_ipv6_in_vista.txt · Last modified: 2010/02/03 11:46 (14 years ago) by bob