Windward Software Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Barcode Scanner Index ======
  * [[:faq:xi3000_barcode_scanner]] (Not on supported equipment list, but configurable and works)
  * [[:faq:ibc_equipment_setup|XI3200 setup available on the IBC Equipment Setup page]]. You will have to scan the Clear PRE/POSTAMBLE, PREAMBLE, STX, then PREAMLE (again) to program a XI3200U. The U is for USB. Note: I was unable to remove the CR postamble on the XI3200U from IBC that I had in the office. Removing the postamble should not be necessary in most cases. (Not on supported equipment list, but configurable and works)
  * [[:faq:programming_a_symbol_ls_2208_barcode_scanner]] (On supported equipment list)
  * [[:faq:scanners:symbol-1900]] (Not on supported equipment list, but configurable and works)
  * [[:faq:scanners:metrologic_series]] (MS9520 Voyager on supported equipment list)
  * [[:faq:wasp800]] (Not on supported equipment list, but configurable and works)

====== Other Links ======
  * [[:pos_devices_-_barcode_scanners]]
  * [[:pos_devices_-_barcode_scanners_list_of_makes_and_models]]