Windward Software Wiki

User Tools

Site Tools

Trace: • datalogic_quickscan_1d_2100_2300_series
datalogic_quickscan_1d_2100_2300_series

This is an old revision of the document!

Download & Print this Configuration file

Pre-amble CTR+B

Scan the configuration document from top to bottom

  1. Enter/Exit Programming Mode
  2. Set Global Prefix
  3. 0
  4. 2
  5. Enter/Exit Programming Mode
  6. Enter/Exit Programming Mode

SystemFive Setting

Go to

  1. Setup Tools > Setup Wizard > Point of Sale Devices > Barcode Reader
  2. Click “Read Barcode Scanner” button on the right side box
  3. Then scan any barcode or item
  4. Lastly click on “Save Setting” button

datalogic_quickscan_1d_2100_2300_series.1593184636.txt.gz · Last modified: 2020/06/26 08:17 (4 years ago) by fgabiana