User Tools

Site Tools


basic_troubleshooting

This is an old revision of the document!


Basic Troubleshooting or Troubleshooting 101

Windward Software

Basic Troubleshooting

We as techs need to follow logical steps, and be able to break a big problem down to the smallest possible pieces, and then eliminate each piece, or group of pieces. So at the end of the process we are left with one piece that is causing the problem.

One big mistake that people do is that they change a whole bunch of things hoping to fix the issue. And they might get lucky and actually fix it. The problem is, that you have not discovered what the problem was. You are only able to say that you did all these things, and one of them looks like it fixed the issue. That means the next time you encounter the issue, you have several things to try again, one of which may fix the problem.

Let’s look at a specific issue.

A customer calls in complaining that they can’t print from System Five. Bear in mind that these are not specific steps in troubleshooting printing errors. This is just a simplified guide to help you understand the troubleshooting process. No matter how long you stare at the big picture you will never find the solution to the problem. Start by asking the customer a few questions, because these questions may tell you right away where to begin looking.

Were you ever able to print to the printer from this computer?

- If No, then check to see if the printer was ever set up on this computer. You may need to install drivers, do a test print from Windows and setup the printer and invoice tree in System Five.

- If Yes, then you need to ask more questions.

- - When did the issue start?

- - Was something changed on this computer just before the issue started occurring?

- - Was anything done to the printer prior to this issue occurring?

If the questions do not reveal anything about the problem, then the next thing you need to ask yourself is “How can I break this issue down to smaller pieces”. Before you start looking at System Five, there are other pieces to this picture that need to be looked at first. Obviously we have System Five and Microsoft Windows, but we can break the issue down further. Remember the customer says that they can’t print, so we also need to look at the printer and the printer driver.

When I approach the issue, I look at what pieces are the simplest to eliminate, and I generally try to start at the closest thing to the problem. What I mean by that is, if it is a printing issue, I start at either the printer, or the Windows Printer Driver.

Can I print a test page from the Windows Printer driver?

- Yes – Great. We have eliminated the printer and the Windows Printer driver as the source of the problem. We can now move on to System Five.

Or

- No – Then we need to look at either the printer or the Windows Driver.

Ask if anyone else prints to that printer, and if they do, have them try to print to it from that other computer.

- - Can they print to it from any other computer?

- - Yes - Eliminate the printer

- - No – Then the Printer is probably the issue. Have the customer check that the printer is on line, and that there aren’t any error messages or error lights showing on the printer. Also if no lights are showing, have the customer check the power cords or check that the printer is even turned on. Yes I have had calls where the customer called in and said that they could not print, and it turned out that someone had unplugged the printer.

Once we have eliminated the printer as the source of the issue, and that others can send print jobs to that printer, the next logical step would be to look at the Windows printer driver.

Check the settings. You may need to look at the settings on another computer to verify the settings in this PC.

Or, do they have multiple copies of the printer driver in the Windows Print Manager. This could point to a hardware change, or some change in the network. Try printing from any copies of the printer driver to determine if any of them can print to the printer. If one of them can… Delete the copies that can’t print to the printer. This will help prevent this type of confusion in the future.

If you still can’t print a test page, then you may need to uninstall, and re-install the driver.

System Five

Now, if we have eliminated the printer and the Windows driver, and you are now able to print from the Windows Printer driver, we can move on to troubleshooting System Five.

Again, we need to break this down to smaller pieces. You may be able to break it down further than I am in this document, but this would be a starting point.

Again, you need to ask the user some basic questions.

- Can they print at all from System Five?

- Is it an invoice printing issue or a label printing issue?

- Is it just a specific invoice type or label type?

These questions help direct you to a specific area within System Five.

Getting to the Solution

The Secret to successful troubleshooting is to keep eliminating pieces of the problem.

As you eliminate what is working, you can further refine your search area, and begin eliminating more areas, and through process of elimination, you will get to the root of the problem.

= Created by Steve Wind September 29 2015 =

basic_troubleshooting.1443543511.txt.gz · Last modified: 2015/09/29 09:18 (9 years ago) by swind